The 46gb SSD is used for the update standard install ready for Home Assistant/Docker install.
One problem occurred. The Triron is accessible but the PHP and epevemodbus scripts are not working.
On a long shot, I replaced the Exar cable with a standard Epever cable. The Exar shows up as ttyUSB0 where the Epever shows up as the stock ttyACM0.
The php scripts work and the system is collecting data. The epevemodbus app is not working. Epevermodbus is not needed to tun the system but was useful in adjusting system settings.
I had problems installing Home Assisant/Docker on the Bookworm installation and after searching the web, I found advice from GoogleAI to update to Trixie (Debian 13), hence the change.
Python 3.13.1 and PHP 8.4 replaced the older versions. Script adjustments were made.
No comments:
Post a Comment